DOPAGmicromix产品系列是设计紧凑，电或气驱动活塞泵计量混合系统。DOPAG micromix产品适用于混合比从100:100到100:4 的低到高黏度多组分材料，如聚胺脂，环氧树脂，硅胶产品，连续生产式的或点计量式的应用。DOPAG micromix材料可以是含磨损填料的材料。设备可以通过压力罐或原料桶泵送材料。

DOPAGmicromix典型应用

• 粘合
• 密封
• 粘合
• 密封

Features and benefits

. Variable mixing ratio
. Variable output rate
. Handles unfilled, filled as well as
abrasive media
. Exact reproducibility of metering
operation
. Highly accurate mixing ratio and
output rate through ratio check
adapter
. Metering computer enables its
use in semi or fully automated
production processes
. Solvent free

Equipment

Standard

. Pressure vessel
. Piston pumps
. Stepper motors
. Static mixing system
- Twin snuffer valve
-Disposable static mixer
. Metering computer

Optional

. Larger capacity pressure vessel
. Material supply by drum pumps
. Hose package
. Abrasion protected components
. Heating
. Ratio check adapter
. Mixing ratio control
. Agitators
. Level control
. Flushing cycle customized for
system concept

Function

Pressure vessels are used to supply the material into
the single acting piston pumps where the material is
metered at the pre-selected ratio. If pasty media is
supplied, optional drum pumps are available. The
pumps are driven by stepper motors.

The system is controlled by a metering computer.
This enables integration into semi or fully automated
production processes.

The MICRO-MIX S is fitted with a static mixing
system that includes a twin snuffer valve combined
with a disposable static mixer.

Should mixed material be allowed to cure in the
mixer, it can be replaced simply and inexpensively,
thus avoiding a time consuming, expensive and
environmentally damaging flushing cycle.

Technical Data

Shot size 0,5 to 10 ml

Dispensing system
Piston pump
Stepper motor
Metering
computer
Volume counter
(optional)
Mixing ratio 100:100 to 100:2, by volume
Mixing system Static mixing system
- Twin snuffer valve
- Disposal static mixer
Material supply Pressure vessels, 2 or 4 l or drum pump
Viscosity range 50 to 100,000 mPa s, with pressure vessel
to 1,000,000 mPa s, with drum pumps
Material characteristics Unfilled, filled, abrasive
Power supply 230 V / 50 Hz / 16 A
Maximum air inlet pressure 6 bar
Dimensions, L x W x H approx. 950 x 400 x 500 mm,
depending on configuration
Weight approx. 70 kg