Page 64 - 246

电梯行业现场安全标准/Elevator Industry Field Safety Standard

7. 乘客安全 Public Safety

总则 事故调查 定期工地检查
7.1 7.2 7.3

 书面形式提醒客户所需要的修理  定期进行检查，对检查结果进行分析和整
改（如：急停开关是否正常、扶手带驱动
Advise the customer in writing on what 建立事故调查程序，及时上报、调查和处理
 速度与梯级速度）
need to be repaired Establish a process to report, investigate
 建立培训课程（困人、召修记录 ) Perform regular inspection and conduct
and analyze alleged accidents analysis and action (for example: emergency
Training program ( entrapped,
stop switch is functioning properly, handrail
callback ,etc) drive speed is substantially the same speed as
 客户交流程序
the steps)
Procedure on customer communication
General Accident Investigations Regularly scheduled visits

设备状况和对新设计的要求 设备检查和测试 新加入维护保养电梯

7.4  在新安装电梯和改造电梯中，除限速器绳 7.5  定期进行检查和测试（如：安全钳限速 7.6  一年内安装轿顶检修控制装置和底坑急停开关

头外，不应在承载部件使用U型螺栓绳卡 器联动测试 Elevator TOCI boxes and PES switches are
installed within one year after the acquisition.
U-bolt wire rope clips shall be replaced Perform regular examinations and tests  一年内安装检修控制盒、底坑急停开关、控制
by a mistake-proof alternative on load- (for example: safety test ) 柜盖板和警示标识
bearing applications on new and modernized
Escalator inspection controls, pit ES switches,
equipment. Governor rope terminations are
controller covers and controller warning signs are
excluded from this requirement.
installed within one year after the acquisition.
Equipment conditions and New Design Equipment examinations and tests Units added by acquisition

13